Name: Shinebot W450
Brand: ILIFE
SKU: sku
Price: 354.99 USD
Availability: InStock
Rating: 5 (1 reviews)

Shinebot W450

$354.99

Buy Now

Shinebot W450

ILIFE W450 Floor Washing Robot, Upgraded Panoview Navigation, 3 Cleaning Modes, i-Voice Assistant, Suitable for A Variety of Hard Floors

5.0 ( 2 Reviews )

Upgraded Panoview Navigation
Convenient App Control
The TidalPower Cleaning System
Clean/Dirty Water Separation
Anti-Collision & Anti-Dropping
Smart App Control via ILIFEHOME
ILIFE Floor Cleaning Solution

$354.99

Quantity:

Stock: 17

Buy Now Add To Cart

Tax: Included

Shipping: Free

Estimated delivery time: 2-5 working days after

payment confirmation.

Add to Wish List (2)

1-Year

limited warranty

30-Day

money-back guarantee

Payment

Safe & Secure

Free shipping

on all robot orders

Upgraded Panoview Navigation

The W450 navigates the rooms systematically with the Panoview scanner, ensuring everything is cleaned and avoids repeating areas.

Clean/Dirty Water Separation

The W450 separates clean and dirty water into independent water tanks. This greatly improves the cleaning efficiency and properly collects the dirty water for easy disposal and cleaning.

Suitable for Various Hard Floors

Removes dust, liquids to heavy stains on tile, marble, hardwood or laminate.

Smart App Control via ILIFEHOME

Use APP Adjust water output, travel speed and roller brush speed to meet specific cleaning needs. Easily monitor and operate the robot anytime, anywhere.

Customizable Cleaning Plan

The W450 can be set up to clean the same area multiple times for an intense cleaning, as well as set to dry the floor after mopping.

Thorough Cleaning

The W450 cleans the floor in 4 steps: spray, scrub, suction and scrape, leaving your floor dry within 1 min.

Clean/Dirty Water Separation

The W450 separates clean and dirty water into independent water tanks. This greatly improves the cleaning efficiency and properly collects the dirty water for easy disposal and cleaning.

Powerful Nidec Brushless Motor

Provides the W450 with excellent performance and longer runtimes.

Anti-Collision & Anti-Dropping

Built-in sensors allow the W450 to avoid obstacles and accidental falls while working.

ILIFE Floor Cleaning Solution

Improve the cleaning efficiency with our cleaning solution. Make your floors shine and your house smell clean and fresh.

SPECS

Model	W450
Cleaning mode	Path, Area, Spot
Suitability	Tile, Vinyl floor, Laminate floor
Color	Black
Dimension	282292118mm
Net weight	3.3kg
Grade-ability	15-degrees
Ability to cross obstacles	≤ 3mm
Water tank capacity	Clean water tank: 850ml / Dirty water tank: 900ml
Cleaning time	≥80min
Charging type	Manual
Charging time	< 300 minutes
Working voltage	19V
Power	100-240VAC 50/60HZ 29W

FAQ

Voice alarm 'Please check and install water tank'.
1. The water tank is not installed and installed in right place.

2. Check if the water tank is installed correctly.

(*Hold the water tank forward;)

(*Align the two ends of the main unit on both sides of the water tank;)

(*Press the water tank after aligning, and confirm the installation after hearing the sound ‘Ka’)
The machine cannot be started by pressing the body button or remote control.
1. Need to press and hold the ‘CLEAN ‘key.

(Turn on, press and hold ‘CLEAN’ for 1s)

(Turn off, press and hold ‘CLEAN’ for 3s, Release the button after a sound alert)

2. The machine has no power, charge robot fully.
Why is the roller brush wet only in the middle and dry on both sides?
After the scrubber wipes the ground, the dirty water is sucked into the dirty tank from the middle, so the position of the roller brush near the suction port will be more wet.
Robot does not flow out of water.
1. The water tank is free of water or blocked, add water, check the water outlet.

2. The water tank is not installed and installed in right place.

3.Check the Clean water inlet and Sprinkler nozzle for blockage.

Robot Water tank leaking.

1. Check the status of the Vent inlet and outlet and perform maintenance cleaning on the two sealing edges.
2. After removing the filter, press the water tank ejector lever to ensure that the Vent inlet and outlet are opened. Rinse the two ports with water. If any debris is stuck at the two ports, clean it in time to ensure that the water tank main body works normally.
3. Regularly clean the edge of the water inlet, the water tank cover, the edge of the dirty spout, and the soft cover of the pouring spout to ensure the sealing of the water tank.